Mold Zap Mold Remediation
Did you know that our eco-friendly, two-part product, Mold Zap, can help you reduce the time it takes to remove mold stains by up to 67%? Mold Zap is our most competitive product for contractors in Atlanta, GA, and surrounding areas, for both residential & commercial mold remediation.
The common problems with treating mold stains
In most cases, treating areas contaminated with mold stains is a two-step process, and depending on the mold severity would determine the needed steps in treating the infected area(s). Most jobs using Mold Zap often require complete removal of mold-infected drywall, followed by treatment of the underlying wooden frame.
In these cases, complete treatment will require two, completely-separate products and processes: the first process is mold remediation of the infected areas; the second step is sealing the interior to prevent possible regrowth.
Sourcing chemicals from two different companies can, and often will, cause difficulties before the start of each job:
- Double the amount of time and effort required in finding each chemical and learning to properly use them.
- Double the cost buying two separate chemicals from two separate companies charging different prices and quantities.
- The possibilities of one or both chemicals not properly cleaning and treating the infected areas, causing potential mold regrowth.
Mold Zap is the solution to these common problems
Mold Zap is our answer to these common problems. By combining both parts of the mold remediation process, Mold Zap can save you both time & money on your next mold job.
Mold Zap is an eco-friendly product that comes in two parts: Part A & Part B. When mixed together, they activate, creating a conveniently cheap method of both remediating mold stains and sealing the area underneath.
When Mold Zap activates and is sprayed onto the affected surfaces, the combined chemicals effectively remove mold and mildew stains while simultaneously sealing the treated area.
Because of its ability to remove mold and mildew stains, and seal the applied area at the same time, there’s no need for additional scrubbing, saving both time and money. Furthermore, by using Mold Zap, you can reduce training and application time as well as overall costs.
In the case of heavy mold buildup on the wooden frame, a HEPA-Vacuum, or use of a scrubbing device, is required in order to remove surface-level mold.
This allows Mold Zap to penetrate the pores in the wood and remove underlying mold stains and prevent regrowth from occurring.
Contractors around the Atlanta, GA, and surrounding, areas continue to choose Mold Zap as their preferred choice for mold remediation & prevention due to its cost-saving benefits and high-effectiveness rate on every job performed using Mold Zap.
Mold Zap is a chemical that should be used on unfinished wooden framing and interior, shown in the picture at the beginning of the article.
Using Mold Zap, standard PPE procedures should be followed to ensure proper application of Mold Zap to the affected areas. To learn more about PPE procedures, please click here.
If you have any questions about Mold Zap mold remediation, or any of our other products, please don’t hesitate to contact us!